Show Vrrp (Session) - Allied Telesis x510-28GTX Command Reference Manual

VRRP C
OMMANDS
( )
SHOW VRRP SESSION

show vrrp (session)

Overview Use this command to display information for a particular VRRP session.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
See the
about VRRPv3 IPv4 configuration details.
show vrrp <vrid> <interface>
Syntax
Mode User Exec and Privileged Exec
Usage See the below sample output from the show vrrp command displaying
information about VRRP session 1 configured on vlan2. Output shows that a
Virtual IP address has been set.
awplus#
See the below sample output from the show vrrp command displaying
information about VRRP session 1 configured on vlan3. Output shows a Virtual IP
address has not been set.
awplus#
C613-50170-01 Rev B
VRRP Feature Overview and Configuration Guide
Parameter Description
<vrid>
<1-255> The virtual router ID for which to display information.
Session must already exist.
<interface> The interface to display information about, for instance, vlan2.
show vrrp 1 vlan2
awplus#show vrrp 1 vlan2
Address family IPv4
VrId <1>
Interface is vlan2
State is Initialize
Virtual IP address is 10.10.11.250 (Not IP owner)
Priority is 100
Advertisement interval is 1 sec
show vrrp 1 vlan3
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
"Getting Started
Guide.
for more information
2136