Show Mls Qos Maps Premark-Dscp - Allied Telesis x510-28GTX Command Reference Manual

Q S C
O OMMANDS
-
SHOW MLS QOS MAPS PREMARK

show mls qos maps premark-dscp

Overview This command displays the premark-dscp map. This map is used when the
dscp
DSCP, CoS and/or bandwidth class of a packet matching the class-map based on a
lookup DSCP value.
show mls qos maps premark-dscp [<0-63>]
Syntax
Mode User Exec and Privileged Exec
Example To display the premark-dscp map for DSCP 1, use the command:
awplus#
Output Figure 40-9: Example output from the show mls qos maps premark-dscp
Related mls qos map premark-dscp to
Commands
trust dscp
C613-50170-01 Rev B
DSCP
command has been specified for a policy-map's class-map to replace the
Parameter Description
<0-63>
DSCP table entry.
show mls qos maps premark-dscp 1
command
PREMARK-DSCP-MAP:

DSCP 1
Bandwidth Class 
-------------------------
New DSCP
New CoS
New Bandwidth Class
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
2 
0
green
trust
1663