Ipv6 Pim Jp-Timer - Allied Telesis x510-28GTX Command Reference Manual

PIM-SM 6 C
V OMMANDS
6 -
IPV PIM JP TIMER

ipv6 pim jp-timer

Overview Use this command to set the PIM-SMv6 join/prune timer. Note that the value set by
the join/prune timer is the value that the device puts into the holdtime field of the
join/prune packets it sends to its neighbors.
Use the no variant of this command to return the PIM-SMv6 join/prune timer to its
default value of 210 seconds.
ipv6 pim jp-timer <1-65535>
Syntax
no ipv6 pim jp-timer [<1-65535>]
Default The default PIM-SMv6 join/prune timer value is 210 seconds.
Mode Global Configuration
awplus#
Example
awplus(config)#
awplus(config)#
awplus(config)#
awplus#
awplus(config)#
C613-50170-01 Rev B
Parameter Description
<1-65535>
Specifies the Join/Prune timer value. The default value is 210
seconds.
configure terminal
ipv6 forwarding
ipv6 multicast-routing
ipv6 pim jp-timer 300
configure terminal
no ipv6 pim jp-timer
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
1395