Show Debugging Pim Dense-Mode - Allied Telesis x510-28GTX Command Reference Manual

PIM-DM C
OMMANDS
-
SHOW DEBUGGING PIM DENSE MODE

show debugging pim dense-mode

Overview This command displays the status of the debugging of the system.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax show debugging pim dense-mode
Mode User Exec and Privileged Exec
Output Figure 35-2: Example output from the show debugging pim dense-mode
Related debug pim dense-mode all
Commands
C613-50170-01 Rev B
command

PIM-DM Debugging status:
PIM-DM Decoder debugging is off
PIM-DM Encoder debugging is off
PIM-DM FSM debugging is off
PIM-DM MRT debugging is off
PIM-DM NHOP debugging is off
PIM-DM NSM debugging is off
PIM-DM VIF debugging is off
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
"Getting Started
Guide.
1454