Auth-Web-Server Ipaddress - Allied Telesis x510-28GTX Command Reference Manual

A C
UTHENTICATION OMMANDS
- -
AUTH WEB SERVER IPADDRESS

auth-web-server ipaddress

Overview This command sets the IP address for the Web-Authentication server.
Use the no variant of this command to delete the IP address for the
Web-Authentication server.
You cannot use the IPv4 address assigned to the device's interface as the
Web-Authentication server address.
auth-web-server ipaddress <ip-address>
Syntax
no auth-web-server ipaddress
Default The Web-Authentication server address on the system is not set by default.
Mode Global Configuration
To set the IP address 10.0.0.1 to the Web-Authentication server, use the
Examples
following commands:
awplus#
awplus(config)#
To delete the IP address from the Web-Authentication server, use the following
commands:
awplus#
awplus(config)#
Validation show auth
Commands
show auth-web-server
show running-config
C613-50170-01 Rev B
Parameter Description
<ip-address>
Web-Authentication server dotted decimal IP address in
A.B.C.D format.
configure terminal
auth-web-server ipaddress 10.0.0.1
configure terminal
no auth-web-server ipaddress
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
1784