Show Epsr - Allied Telesis x510-28GTX Command Reference Manual

E P S
THERNET ROTECTION WITCHED

SHOW EPSR

show epsr
Overview This command displays information about all EPSR instances.
show epsr
Syntax
Mode User Exec and Privileged Exec
Example To show the current settings of all EPSR instances, use the command:
awplus#
Output: The following examples show the output display for a non-superloop topology
non-superloop network.
topology
Table 1: Example output from the show epsr command run on a transit node
C613-50170-01 Rev B
R (EPSR ™) C
ING ING OMMANDS
show epsr
EPSR Information
------------------------------------------------------------
Name .......................... test2
Mode .......................... Transit
Status ........................ Enabled
State ......................... Links-Up
Control Vlan .................. 2
Data VLAN(s) .................. 10
Interface Mode ................ Ports Only
First Port .................... port1.0.1
First Port Status ............. Down 
First Port Direction .......... Unknown
Second Port ................... port1.0.2
Second Port Status ............ Down 
Second Port Direction ......... Unknown
Trap .......................... Enabled
Master Node ................... Unknown
Enhanced Recovery ............. Disabled
------------------------------------------------------------
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
2163