Auth-Web-Server Session-Keep - Allied Telesis x510-28GTX Command Reference Manual

A C
UTHENTICATION OMMANDS
- - -
AUTH WEB SERVER SESSION KEEP

auth-web-server session-keep

Overview This command enables the session-keep feature to jump to the original URL after
being authorized by Web-Authentication.
Use the no variant of this command to disable the session keep feature.
Syntax auth-web-server session-keep
no auth-web-server session-keep
Default The session-keep feature is disabled by default.
Mode Global Configuration
Usage This function doesn't ensure to keep session information in all cases.
Authenticated supplicant may be redirected to unexpected page when
session-keep is enabled. This issue occurred by supplicant sending HTTP packets
automatically after authentication page is displayed and the URL is written.
Examples To enable the session-keep feature, use the following commands:
awplus#
awplus(config)#
To disable the session-keep feature, use the following commands:
awplus#
awplus(config)#
Validation show auth
Commands
show auth-web-server
show running-config
C613-50170-01 Rev B
configure terminal
auth-web-server session-keep
configure terminal
no auth-web-server session-keep
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
1800