G8032 Profile - Allied Telesis x510-28GTX Command Reference Manual

G.8032 E R P
THERNET ING ROTECTION
8032
G PROFILE

g8032 profile

Overview Use this command to create a G.8032 Ethernet Ring Protection (ERP) instance
profile, or to enter that instance's profile context.
Use the no variant of this command to destroy the specified instance.
Syntax g8032 profile {<erp-profile-name>|default-profile}
no g8032 profile <erp-profile-name>
Default A profile with the name "default-profile" will exist in the system and is used by
default by an ERP instance. All the parameters in the default profile take on the
default values.
Mode Global Configuration
Example To enter the context of a profile named "prof_1", use the following commands:
awplus(config)#
awplus(g8032-profile-config)#
Related enable (G.8032)
Commands
profile name
show g8032 profile
timer (G.8032)
Command Version 5.4.7-0.1: command added
changes
C613-50170-01 Rev B
S C
WITCHING OMMANDS
Parameter
<erp-profile-name>
default-profile
g8032 profile prof_1
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
The name of the G.8032 profile. This can be up to 32
characters.
The name of the system's default profile for G.8032. This
profile is created by the system automatically and can not
be destroyed.
2192