Auth Critical - Allied Telesis x510-28GTX Command Reference Manual

A C
UTHENTICATION OMMANDS

AUTH CRITICAL

auth critical
Overview This command enables the critical port feature on the interface. When the critical
port feature is enabled on an interface, and all the RADIUS servers are unavailable,
then the interface becomes authorized.
The no variant of this command disables critical port feature on the interface.
Syntax auth critical
no auth critical
Default The critical port of port authentication is disabled.
Mode Interface Configuration for a static channel, a dynamic (LACP) channel group, or a
switch port; or Authentication Profile mode.
To enable the critical port feature on interface port1.0.2, use the following
Examples
commands:
awplus#
awplus(config)#
awplus(config-if)#
To disable the critical port feature on interface port1.0.2, use the following
commands:
awplus#
awplus(config)#
awplus(config-if)#
To enable the critical port feature on authentication profile 'student', use the
commands:
awplus#
awplus(config)#
awplus(config-auth-profile)#
To disable the critical port feature on authentication profile 'student', use the
commands:
awplus#
awplus(config)#
awplus(config-auth-profile)#
Related auth profile (Global Configuration)
Commands
show auth-web-server
show dot1x
show dot1x interface
show running-config
C613-50170-01 Rev B
configure terminal
interface port1.0.2
auth critical
configure terminal
interface port1.0.2
no auth critical
configure terminal
auth profile student
configure terminal
auth profile student
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
auth critical
no auth critical
1720