Show Ipv6 Pim Sparse-Mode Interface - Allied Telesis x510-28GTX Command Reference Manual

PIM-SM 6 C
V OMMANDS
6 -
SHOW IPV PIM SPARSE MODE INTERFACE

show ipv6 pim sparse-mode interface

Overview Use this command to show PIM-SMv6 interface information. Note that you can
specify an individual VLAN interface with the optional parameter. Alternatively,
you can display PIM-SMv6 interface information for all interfaces if you omit the
optional interface parameter.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show ipv6 pim sparse-mode interface
Syntax
Mode User Exec and Privileged Exec
Examples To display information about all PIM-SMv6 interfaces, use the command:
awplus#
Table 1: Parameters in the output from the show ipv6 pim sparse-mode
C613-50170-01 Rev B
show ipv6 pim sparse-mode interface
awplus#show ipv6 pim sparse-mode interface 
Interface VIFindex Ver/
vlan2 0
Address : fe80::207:e9ff:fe02:81d
Global Address: 3ffe:192:168:1::53
DR : fe80::20e:cff:fe01:facc
vlan3 2
Address : fe80::207:e9ff:fe02:21a2
Global Address: 3ffe:192:168:10::53
DR : this system
interface command
Parameters
Address
Interface
VIF Index
Ver/Mode
Nbr Count
DR Priority
DR
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Nbr DR
Mode Count Priority
v2/S 2 1
v2/S 2 1
Description
Primary PIM-SMv6 address.
Name of the PIM-SMv6 interface.
The Virtual Interface index of the VLAN.
PIMv6 version/Sparse mode.
Neighbor count of the PIM-SMv6 interface.
Designated Router priority.
The IPv6 address of the Designated Router.
"Getting Started
Guide.








1415