V
C
S
(VCS
IRTUAL
HASSIS
TACKING
SHOW STACK
show stack
Overview
Use this command to display summary information about current stack members.
show stack
Syntax
Mode
User Exec and Privileged Exec
Usage
This command displays summary information about current stack members. See
show stack detail
Example
To display summary information about the stack, use the command:
awplus#
Output
Figure 50-5: Example output from the show stack command
Table 3: Parameters in the output from the show stack command
C613-50170-01 Rev B
™) C
TACK
OMMANDS
to display detailed stack information.
show stack
Virtual Chassis Stacking summary information
ID
Pending ID
MAC address
1
-
0000.cd28.07e1
2
-
0015.77c2.4d44
3
-
0015.77c9.7464
4
-
-
Operational Status
Stack MAC address
Parameter
Description
ID
Stack-ID.
MAC
Stack member MAC address.
address
Priority
Stack member master election priority (between 0 and 255). Note
that the lowest number has the highest priority.
Role
Stack member's role in the stack, this can be one of:
• Active Master
• Disabled Master— this is the temporary master when there is a
communication break within the stack, but communication still
exists across the resiliency link. In this state all switch ports within
the stack are disabled by default, but a different configuration can
be run by a "type stack disabled-master" trigger.
• Backup Member— a device other than the stack master.
• Provisioned— indicates that the stack position is provisionally
configured, i.e. ready to accept a particular switch type into the
stack.
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Priority
Status
Role
128
Ready
Active Master
128
Ready
Backup Member
128
Syncing Backup Member
-
-
Provisioned
Normal operation
0000.cd28.07e1
2079