Ipv6 Pim Rp-Register-Kat - Allied Telesis x510-28GTX Command Reference Manual

PIM-SM 6 C
V OMMANDS
6 - -
IPV PIM RP REGISTER KAT

ipv6 pim rp-register-kat

Overview Use this command to configure the Keep Alive Time (KAT) for (S,G) states at the RP
(Rendezvous Point) to monitor PIM-SMv6 Register packets.
Use the no variant of this command to return the PIM-SMv6 KAT timer to its default
value of 210 seconds.
Syntax ipv6 pim rp-register-kat <1-65535>
no ipv6 pim rp-register-kat
Mode Global Configuration
Default The default PIM-SMv6 KAT timer value is 210 seconds.
awplus#
Examples
awplus(config)#
awplus(config)#
awplus(config)#
awplus#
awplus(config)#
Related ipv6 pim rp-address
commands
ipv6 pim rp-candidate
C613-50170-01 Rev B
Parameter Description
<1-65536>
Specify the KAT timer in seconds. The default value is 210 seconds.
configure terminal
ipv6 forwarding
ipv6 multicast-routing
ipv6 pim rp-register-kat 3454
configure terminal
no ipv6 pim rp-register-kat
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
1406