Show Ip Pim Dense-Mode Interface Detail - Allied Telesis x510-28GTX Command Reference Manual

PIM-DM C
OMMANDS
-
SHOW IP PIM DENSE MODE INTERFACE DETAIL

show ip pim dense-mode interface detail

Overview This command displays detailed information on a PIM-DM interface.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax show ip pim dense-mode interface detail
Mode User Exec and Privileged Exec
awplus#
Example
Output Figure 35-3: Example output from the show ip pim dense-mode interface
C613-50170-01 Rev B
show ip pim dense-mode interface detail
detail command
vlan2 (vif-id: 0):

Address 192.168.1.53/24
Hello period 30 seconds, Next Hello in 30 seconds

Neighbors:

192.168.1.152/32

192.168.1.149/32

vlan3 (vif-id: 2):

Address 192.168.10.53/24

Hello period 30 seconds, Next Hello in 8 seconds

Neighbors: none
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
"Getting Started
Guide.
1457