Show Radius - Allied Telesis x510-28GTX Command Reference Manual

RADIUS C
OMMANDS

SHOW RADIUS

show radius
Overview This command displays the current RADIUS server configuration and status.
show radius
Syntax
Mode User Exec and Privileged Exec
Example To display the current status of RADIUS servers, use the command:
awplus#
Output Figure 44-2: Example output from the show radius command showing RADIUS
Example See the sample output below showing RADIUS client status and RADIUS
configuration:
awplus#
C613-50170-01 Rev B
show radius
servers
RADIUS Global Configuration
Source Interface : not configured
Secret Key : secret
Timeout : 5 sec
Retransmit Count : 3
Deadtime : 20 min
Server Host : 192.168.1.10
Authentication Port : 1812
Accounting Port : 1813
Secret Key : secret
Timeout : 3 sec
Retransmit Count : 2
Server Host : 192.168.1.11
Authentication Port : 1812
Accounting Port : not configured

Server Name/ Auth
IP Address Port
------------------------------------------------------------
192.168.1.10 1812
192.168.1.11 1812
show radius
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Acct Auth Acct
Port Status Status
1813 Alive Alive
N/A Alive N/A
1899