Aaa Accounting Auth-Web - Allied Telesis x510-28GTX Command Reference Manual

AAA C
OMMANDS
-
AAA ACCOUNTING AUTH WEB

aaa accounting auth-web

Overview This command configures an accounting method list for Web-based
authentication. An accounting method list specifies what type of accounting
messages are sent and which RADIUS servers the accounting messages are sent to.
Use this command to configure either the default method list, which is
automatically applied to interfaces with Web-based authentication enabled, or a
named method list, which can be applied to an interface with the
accounting
Use the no variant of this command to disable either the default or a named
accounting method list for Web-based authentication. Once all method lists are
disabled, AAA accounting for Web-based authentication is disabled globally.
aaa accounting auth-web {default|<list-name>}
Syntax
{start-stop|stop-only|none} group {<group-name>|radius}
no aaa accounting auth-web {default|<list-name>}
Default RADIUS accounting for Web-based authentication is disabled by default.
Mode Global Configuration
Usage This command can be used to configure either the default accounting method list
or a named accounting method list:
•
•
There are two ways to define servers where RADIUS accounting messages are sent:
•
C613-50170-01 Rev B
command.
Parameter Description
default
Configure the default accounting method list
<list-name>
Configure a named accounting method list
start-stop
Sends a start accounting message at the beginning of the session
and a stop accounting message at the end of the session.
stop-only
Only sends a stop accounting message at the end of the session.
none
No accounting record sent.
group
Use a server group
<group-name>
Server group name.
radius
Use all RADIUS servers.
default: the default accounting method list which is automatically applied
to all interfaces with Web-based authentication enabled.
<list-name>: a user named list which can be applied to an interface using the
auth-web accounting
group radius: use all RADIUS servers configured by
command
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
command.
auth-web
radius-server host
1831