Debug Vrrp Packet - Allied Telesis x510-28GTX Command Reference Manual

VRRP C
OMMANDS

DEBUG VRRP PACKET

debug vrrp packet
Overview Use this command to specify debugging options for VRRP packets.
Use the no variant of this command to disable this function.
Syntax debug vrrp packet [send|recv]
no debug vrrp packet [send|recv]
Mode Privileged Exec and Global Configuration
Usage The debug vrrp packet command enables the display of debug information
related to the sending and receiving of packets.
See the
about VRRPv3 debugging details.
Examples The example below shows you how to enable received and sent packet debugging
for VRRP:
awplus#
awplus(config)#
The example below shows you how to enable only received packet debugging for
VRRP:
awplus#
awplus(config)#
The example below shows you how to enable only sent packet debugging for
VRRP:
awplus#
awplus(config)#
The example below shows you how to disable packet debugging for VRRP:
awplus#
awplus(config)#
Related show debugging vrrp
Commands
undebug vrrp packet
C613-50170-01 Rev B
Parameter Description
send
Specifies the debug option set for sent packets.
recv
Specifies the debug option set for received packets.
VRRP Feature Overview and Configuration Guide
configure terminal
debug vrrp packet
configure terminal
debug vrrp packet recv
configure terminal
debug vrrp packet send
configure terminal
no debug vrrp packet
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
for more information
2116