Vrrp Commands; Introduction; Chapter 51: Vrrp Commands - Allied Telesis x510-28GTX Command Reference Manual

51

Introduction

Overview This chapter provides an alphabetical reference for commands used to configure
the Virtual Router Redundancy Protocol (VRRP). For more information, see the
VRRP Feature Overview and Configuration
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
C613-50170-01 Rev B

VRRP Commands

"advertisement-interval" on page 2109
"alternate-checksum-mode" on page 2111
"circuit-failover" on page 2112
"debug vrrp" on page 2114
"debug vrrp events" on page 2115
"debug vrrp packet" on page 2116
"disable (VRRP)" on page 2117
"enable (VRRP)" on page 2118
"preempt-mode" on page 2119
"priority" on page 2121
"router ipv6 vrrp (interface)" on page 2123
"router vrrp (interface)" on page 2125
"show debugging vrrp" on page 2127
"show running-config router ipv6
"show running-config router
"show vrrp" on page 2130
"show vrrp counters" on page 2132
"show vrrp ipv6" on page 2135
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Guide.
vrrp" on page 2128
vrrp" on page 2129
"Getting Started
Guide.
2107