Show Auth Supplicant - Allied Telesis x510-28GTX Command Reference Manual

A C
UTHENTICATION OMMANDS

SHOW AUTH SUPPLICANT

show auth supplicant
Overview This command shows the supplicant (client device) state when authentication is
configured for the switch. Use the optional brief parameter to show a summary of
the supplicant state.
show auth supplicant [<macadd>] [brief]
Syntax
Mode Privileged Exec
Examples To display a summary of authenticated supplicant information on the device, enter
the command:
awplus#
To display authenticated supplicant information on the device, enter the
command:
awplus#
To display authenticated supplicant information for device with MAC address
0000.5E00.5301, enter the command:
awplus#
Output Figure 42-4: Example output from show auth supplicant brief
awplus#show auth supplicant brief
Interface port2.0.3
authenticationMethod: dot1x/mac/web
Two-Step Authentication
firstMethod: mac
secondMethod: dot1x/web
totalSupplicantNum: 1
authorizedSupplicantNum: 1
macBasedAuthenticationSupplicantNum: 0
dot1xAuthenticationSupplicantNum: 0
webBasedAuthenticationSupplicantNum: 1
otherAuthenticationSupplicantNum: 0RADIUS Group Configuration

Interface VID Mode MAC Address
=========== ==== ==== ============== ================= =============== ========
port2.0.3 1 W
C613-50170-01 Rev B
Parameter Description
<macadd>
Mac (hardware) address of the supplicant.
Entry format is HHHH.HHHH.HHHH (hexadecimal).
brief
Brief summary of the supplicant state.
show auth supplicant brief
show auth supplicant
show auth supplicant 0000.5E00.5301
001c.233e.e15a Authenticated
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Status IP Address
192.168.1.181
Username
test
1819