Auth-Web-Server Page Success-Message - Allied Telesis x510-28GTX Command Reference Manual

A C
UTHENTICATION OMMANDS
- -
AUTH WEB SERVER PAGE SUCCESS

auth-web-server page success-message

Overview This command sets the success message on the web-authentication page.
Use the no variant of this command to remove the success message.
Note that if you need to customize the login page extensively, you can instead
replace it with your own page. See "Customising the Login Page" in the
Port Authentication Feature Overview and Configuration
auth-web-server page success-message text <success-message>
Syntax
no auth-web-server page success-message
Default No success message is set by default.
Mode Global Configuration
Examples To set the success message on the web-authentication page, use the commands:
awplus#
awplus(config)#
success message
To unset the success message on the web-authentication page, use the
commands:
awplus#
awplus(config)#
Validation show auth-web-server page
Commands
C613-50170-01 Rev B
-
MESSAGE
Parameter
<success-message>
configure terminal
auth-web-server page success-message text Your
configure terminal
no auth-web-server page success-message
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
Text string of the success message
AAA and
Guide.
1789