Match Vlan - Allied Telesis x510-28GTX Command Reference Manual

Q S C
O OMMANDS

MATCH VLAN

match vlan
Overview Use this command to define the VLAN ID as match criteria.
Use the no variant of this command to disable the VLAN ID used as match criteria.
Syntax match vlan <1-4094>
no match vlan
Mode Class Map Configuration
To configure a class-map named cmap1 to include traffic from VLAN 3, use the
Examples
commands:
awplus#
awplus(config)#
awplus(config-cmap)#
To disable the configured VLAN ID as a match criteria for the class-map named
cmap1, use the commands:
awplus#
awplus(config)#
awplus(config-cmap)#
C613-50170-01 Rev B
Parameter Description
<1-4094>
The VLAN number.
configure terminal
class-map cmap1
configure terminal
class-map cmap1
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
match vlan 3
no match vlan
1632