Show Ipv6 Pim Sparse-Mode Local-Members - Allied Telesis x510-28GTX Command Reference Manual

PIM-SM 6 C
V OMMANDS
6 -
SHOW IPV PIM SPARSE MODE LOCAL

show ipv6 pim sparse-mode local-members

Overview Use this command to show detailed local member information on a VLAN interface
configured for PIM-SMv6. If you do not specify a VLAN interface then detailed local
member information is shown for all VLAN interfaces configured for PIM-SMv6.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
show ipv6 pim sparse-mode local-members [<interface>]
Syntax
Mode User Exec and Privileged Exec
Example To show detailed PIM-SMv6 information for all PIM-SMv6 configured VLAN
interfaces, use the command:
awplus#
Output Figure 34-5: Example output from the show ipv6 pim sparse-mode
Example To show detailed PIM-SMv6 information for the PIM-SMv6 configured interface
vlan1, use the command:
awplus#
C613-50170-01 Rev B
-
MEMBERS
Parameter Description
<interface> Optional Specify the interface. For instance, VLAN interface vlan2.
show ipv6 pim sparse-mode local-members
local-members command
awplus#show ipv6 pim sparse-mode local-members 
PIM Local membership information 

vlan1: 

(*, ff02::1:ff6b:4783) : Include 

vlan203: 

(*, ff0e:1::4) : Include 

show ipv6 pim sparse-mode local-members vlan1
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
"Getting Started
Guide.
1418