Show Stack Resiliencylink - Allied Telesis x510-28GTX Command Reference Manual

V C S (VCS
IRTUAL HASSIS TACKING

SHOW STACK RESILIENCYLINK

show stack resiliencylink
Overview Use this command to display information about the current status of the
resiliency-link across the members of the stack.
show stack resiliencylink
Syntax
Mode User Exec and Privileged Exec
Example To display information about the current status of the resiliency-link across the
stack members, use the command:
awplus#
Output Figure 50-7: Example output from the show stack resiliencylink command
C613-50170-01 Rev B
™) C
TACK OMMANDS
show stack resiliencylink
awplus(config)# show stack resiliencylink
Stack member 1:
-----------------------------------------------------------
Status
Interface
Interface state
Resiliency-link port(s)

Stack member 2:
-----------------------------------------------------------
Status
Interface
Interface state
Resiliency-link port(s)
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Configured
vlan4093
UP
port1.0.11
Successful
vlan4093
UP
port2.0.11
2086