Ip Dhcp Snooping Verify Mac-Address - Allied Telesis x510-28GTX Command Reference Manual

DHCP S C
NOOPING OMMANDS
-
IP DHCP SNOOPING VERIFY MAC

ip dhcp snooping verify mac-address

Overview Use this command to verify that the source MAC address and client hardware
address match in DHCP packets received on untrusted ports.
Use the no variant of this command to disable MAC address verification.
Syntax ip dhcp snooping verify mac-address
no ip dhcp snooping verify mac-address
Default Enabled—source MAC addresses are verified by default.
Mode Global Configuration
Usage When MAC address verification is enabled, the switch treats DHCP packets with
source MAC address and client hardware address that do not match as DHCP
snooping violations: it drops them and applies any other violation action specified
by the
any issues have been resolved, use the
Example To disable MAC address verification on the switch, use the commands:
awplus#
awplus(config)#
Related ip dhcp snooping violation
Commands
show ip dhcp snooping
show ip dhcp snooping statistics
C613-50170-01 Rev B
ADDRESS
ip dhcp snooping violation
configure terminal
no ip dhcp snooping verify mac-address
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
command. To bring the port back up again after
shutdown command.
2011