Ipv6 Access-List (Named Ipv6 Hardware Acl) - Allied Telesis x510-28GTX Command Reference Manual

IP 6 H A C
V ARDWARE CCESS ONTROL
6 - ( IP 6
IPV ACCESS LIST NAMED V

ipv6 access-list (named IPv6 hardware ACL)

Overview Use this command to either create a new IPv6 hardware access-list, or to select an
existing IPv6 hardware access-list in order to apply a filter entry to it.
Use the no variant of this command to delete an existing IPv6 hardware access-list.
NOTE
it is assigned to.
ipv6 access-list <ipv6-access-list-name>
Syntax
no ipv6 access-list <ipv6-access-list-name>
Mode Global Configuration
Default Any traffic on an interface controlled by a hardware ACL that does not explicitly
match a filter is permitted.
Usage Use IPv6 hardware named access-lists to control the transmission of IPv6 packets
on an interface, and restrict the content of routing updates. The switch stops
checking the IPv6 hardware named access-list when a match is encountered.
This command moves you to the (config-ipv6-hw-acl) prompt for the
selected IPv6 hardware named access-list number. From there you can configure
the filters for this selected IPv6 hardware named access-list.
Once you have configured the ACL, use the
access-group
that the ACL will only apply to incoming data packets.
Hardware ACLs will permit access unless explicitly denied by an ACL action.
Examples To create an IPv6 access-list named "my-ipv6-acl", use the commands:
awplus#
awplus(config)#
awplus(config-ipv6-hw-acl)#
To delete the IPv6 access-list named "my-ipv6-acl", use the commands:
awplus#
awplus(config)#
Related (named IPv6 hardware ACL: ICMP entry)
Commands
C613-50170-01 Rev B
L (ACL) C
IST OMMANDS
ACL)
HARDWARE
: Before you can delete an access-list, you must first remove it from any interface
Parameter
<ipv6-access-list-name>
command to apply this ACL to a port, VLAN or QoS class-map. Note
configure terminal
ipv6 access-list my-ipv6-acl
configure terminal
no ipv6 access-list my-ipv6-acl
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
Specify an IPv6 access-list name.
ipv6 traffic-filter or the match
1565