Server Enable - Allied Telesis x510-28GTX Command Reference Manual

L RADIUS S C
OCAL ERVER OMMANDS

SERVER ENABLE

server enable
Overview This command enables the local RADIUS server. The local RADIUS server feature is
started immediately when this command is issued.
The no variant of this command disables local RADIUS server. When this command
is issued, the local RADIUS server stops operating.
Syntax server enable
no server enable
Default The local RADIUS server is disabled by default and must be enabled for use with
this command.
Mode RADIUS Server Configuration
Examples To enable the local RADIUS server, use the following commands:
awplus#
awplus(config)#
awplus(config-radsrv)#
To disable the local RADIUS server, use the command:
awplus#
awplus(config)#
awplus(config-radsrv)#
Related server auth-port
Commands
show radius local-server statistics
C613-50170-01 Rev B
configure terminal
radius-server local
server enable
configure terminal
radius-server local
no server enable
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
1937