Epsr Datavlan - Allied Telesis x510-28GTX Command Reference Manual

E P S
THERNET ROTECTION WITCHED

EPSR DATAVLAN

epsr datavlan
Overview This command adds a data VLAN or a range of VLAN identifiers to a specified EPSR
instance.
The no variant of this command removes a data VLAN or data VLAN range from an
EPSR instance.
Syntax epsr <epsr-instance> datavlan {<vlanid>|<vlanid-range>}
no epsr <epsr-instance> datavlan {<vlanid>|<vlanid-range>}
Mode EPSR Configuration
Usage We recommend you
•
•
To add vlan3 to the EPSR instance called blue, use the command:
Examples
awplus(config-epsr)#
To add vlan2 and vlan3 to the EPSR instance called blue, use the command:
awplus(config-epsr)#
To remove vlan3 from the EPSR instance called blue, use the command:
awplus(config-epsr)#
To remove vlan2 and vlan3 from the EPSR instance called blue, use the
command:
awplus(config-epsr)#
Related epsr mode master controlvlan primary port
Commands
epsr mode transit controlvlan
show epsr
C613-50170-01 Rev B
R (EPSR ™) C
ING ING OMMANDS
Parameter
<epsr-instance>
datavlan
<vlanid>
<vlanid-range>
set the EPSR control VLAN to vlan2, using the
primary port and epsr mode transit controlvlan
set the EPSR data VLAN between to be a value between 3 and 4094, using the
epsr datavlan command.
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
Name of the EPSR instance.
Adds a data VLAN to be protected by the EPSR instance.
The VLAN's VID - a number between 1 and 4094 excluding
the number selected for the control VLAN.
Specify a range of VLAN identifiers using a hyphen to
separate identifiers.
epsr blue datavlan vlan3
epsr blue datavlan vlan2-vlan3
no epsr blue datavlan vlan3
no epsr blue datavlan vlan2-vlan3
epsr mode master controlvlan
commands, then
2154