Show Counter Stack - Allied Telesis x510-28GTX Command Reference Manual

V C S (VCS
IRTUAL HASSIS TACKING

SHOW COUNTER STACK

show counter stack
Overview Use this command to display stack related counter information.
show counter stack
Syntax
Default All counters are reset when the stack member is rebooted.
Mode User Exec and Privileged Exec
Usage This displays the stacking counter information for every stack member.
Examples To display the stacking counter information about the whole stack, use the
following command.
awplus#
Figure 50-1: Example output from the show counter stack command
C613-50170-01 Rev B
™) C
TACK OMMANDS
show counter stack
Virtual Chassis Stacking counters

Stack member 1:

Topology Event counters
Units joined
Units left
Links up
Links down
ID conflict
Master conflict
Master failover
Master elected
Master discovered
SW autoupgrades

Stack Port 1 Topology Event counters
Link up
Link down
Nbr re-init
Nbr incompatible
Nbr 2way comms
Nbr full comms

Stack Port 2 Topology Event counters
Link up
Link down
Nbr re-init
Nbr incompatible
Nbr 2way comms
Nbr full comms
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
.........1
.........0
.........1
.........0
.........0
.........0
.........0
.........1
.........0
.........0
.........3
.........2
.........0
.........0
.........1
.........1
.........0
.........0
.........0
.........0
.........0
.........0
2072