Router Ipv6 Vrrp (Interface) - Allied Telesis x510-28GTX Command Reference Manual

VRRP C
OMMANDS
6 ( )
ROUTER IPV VRRP INTERFACE

router ipv6 vrrp (interface)

Overview Use this command to configure VRRPv3 for IPv6 and define the interface that will
participate in virtual routing to send and receive advertisement messages. This
command allows you to enter the Router Configuration mode.
Use the no variant of this command to remove the VRRPv3 for IPv6 configuration.
Disable the VRRP session before using the no variant of this command.
router ipv6 vrrp <vrid> <interface>
Syntax
no router ipv6 vrrp <vrid> <interface>
Mode Global Configuration
Usage Use the required <interface> placeholder to define the interface that will
participate in virtual routing. This interface is used for two purposes - to
send/receive advertisement messages and to forward on behalf of the virtual
router when in master state.
NOTE
performance, depending on the device CPU, the other protocols it is running, and
whether you set the advertisement interval to less than 1 second.
See the
about VRRPv3 IPv6 configuration details.
Examples The example below shows you how to enable a VRRPv3 session with VR ID 3 on
vlan2:
awplus#
awplus(config)#
awplus(config-router)#
awplus(config-router)#
The example below shows you how to disable a VRRPv3 session with VR ID 3 on
vlan2:
awplus(config-router)#
awplus(config-router)#
awplus(config)#
awplus(config)#
C613-50170-01 Rev B
Parameter Description
<vrid>
<1-255> The ID of the virtual router VRRPv3 IPv6 session to create.
<interface>
Specify the name of the interface that will participate in the virtual
routing. The interface must exist on the router. The interface
specified sends and receives VRRPv3 IPv6 advertisement messages.
: Configuring a high number of instances may adversely affect the device's
VRRP Feature Overview and Configuration Guide
configure terminal
router ipv6 vrrp 3 vlan2
no router ipv6 vrrp 3 vlan2
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
enable
disable
exit
for more information
2123