Table of Contents
Advertisement
Chapter 1: Overview
Single-port BiDi 1000Base-LX SFP transceivers
1000Base-ZX SFP transceivers
1000Base-T twisted pair transceivers
Note
SFP transceivers must be purchased separately. For a list of supported transceivers, contact your Allied
Telesis distributor or reseller.
Alarm Ports
The IE200 contains two alarm ports: One for alarm input and one for alarm output.
LEDs
The IE200 contains LEDs to report device status and link/activity port LEDs.
Link/activity and duplex mode LEDs for the twisted pair ports on non-PoE switches
Link/activity and PoE status LEDs for the twisted pair ports on PoE switches
Link/activity LEDs for SFP slots
Status LEDs for fault alarms and both power supplies
Installation Options
There are two installation options for the IE200:
DIN rail standard EN 50022
Wall mount
MAC Address Table
IE200 MAC address tables support:
Storage capacity of 4,000 MAC address entries
Automatic learning and aging
Management Software and Interfaces
The IE200 supports the following management software and interfaces:
AlliedWare Plus management software
Command line interface
Web browser interface
AT-IE200 Series Installation Guide
15
Advertisement
Table of Contents
