Show G8032 Erp-Instance - Allied Telesis x510-28GTX Command Reference Manual

G.8032 E R P
THERNET ING ROTECTION
8032 -
SHOW G ERP INSTANCE

show g8032 erp-instance

Overview Use this command to show one or all G.8032 Ethernet Ring Protection (ERP)
instance(s) configuration and dynamic state data.
show g8032 erp-instance {<erp-instance-name>|all}
Syntax
Mode User Exec and Privileged Exec
Example To show the configuration and dynamic state data for an ERP instance named
"blue", use the following command:
awplus#
Output Figure 53-2: Example output from the show g8032 erp-instance command.
C613-50170-01 Rev B
S C
WITCHING OMMANDS
Parameter
<erp-instance-name>
all
show g8032 erp-instance blue
awplus#show g8032 erp-instance blue
------------------------------------------------------------------
Instance Name
Admin State
G.8032 State
Failure of Proto-TO : false
Phy Ring
East Link
West Link
RPL Role East Link
RPL Role West Link
CFM MEP East
CFM MEP West
ERP Profile
Level
Ring-ID
RAPS-Channel VLAN
Sub-ring
Virtual Channel
Data Traffic VLANs
TCN To Inst
TCN Flush Event
Wait-To-Restore
Wait-To-Block
NodeID
SNMP Traps
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
The name of a specific G.8032 ERP instance.
Use this to show all instances.
: blue
: enabled
: IDLE
: R1 - East (port2.0.25) : West (sa1)
: Link_Unblocked
: Link_blocked
: NONE
: OWNER
: -
: -
: default-profile
: 0
: 1
: 900
: disabled
: disabled
: 910,920,930,940
: -
: G8032
: -
: -
: 0000.cd37.0c25
: enabled
2200