Aaa Accounting Update - Allied Telesis x510-28GTX Command Reference Manual

AAA C
OMMANDS

AAA ACCOUNTING UPDATE

aaa accounting update
Overview This command enables periodic accounting reporting to either the RADIUS or
TACACS+ accounting server(s) wherever login accounting has been configured.
Note that unlimited RADIUS servers and up to four TACACS+ servers can be
configured and consulted for accounting. The first server configured is regarded as
the primary server and if the primary server fails then the backup servers are
consulted in turn. A backup server is consulted if the primary server fails, i.e. is
unreachable.
Use the no variant of this command to disable periodic accounting reporting to
the accounting server(s).
aaa accounting update [periodic <1-65535>]
Syntax
no aaa accounting update
Default Periodic accounting update is disabled by default.
Mode Global Configuration
Usage Use this command to enable the device to send periodic AAA login accounting
reports to the accounting server. When periodic accounting report is enabled,
interim accounting records are sent according to the interval specified by the
periodic parameter. The accounting updates are start messages.
If the no variant of this command is used to disable periodic accounting reporting,
any interval specified by the periodic parameter is reset to the default of 30
minutes when accounting reporting is reenabled, unless this interval is specified.
Examples To configure the switch to send period accounting updates every 30 minutes, the
default period, use the following commands:
awplus#
awplus(config)#
To configure the switch to send period accounting updates every 10 minutes, use
the following commands:
awplus#
awplus(config)#
C613-50170-01 Rev B
Parameter Description
periodic
Send accounting records periodically.
<1-65535>
The interval to send accounting updates (in minutes). The default is
30 minutes.
configure terminal
aaa accounting update
configure terminal
aaa accounting update periodic 10
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
1840