Atmf Backup Redundancy Enable - Allied Telesis x510-28GTX Command Reference Manual

A T M F
LLIED ELESIS ANAGEMENT

ATMF BACKUP REDUNDANCY ENABLE

atmf backup redundancy enable
Overview This command is used to enable or disable AMF backup redundancy.
atmf backup redundancy enable
Syntax
no atmf backup redundancy enable
Default Disabled
Mode Global Configuration
Usage If the AMF Master or Controller supports any removable media (SD card/USB), it
uses the removable media as the redundant backup for the AMF data backup.
This feature is valid only if remote file servers are configured on the AMF Master or
Controller.
We recommend using the ext3 or ext4 filesystem on external media that are used
for AMF backups.
Example To enable AMF backup redundancy, use the commands:
awplus#
awplus(config)#
To disable AMF backup redundancy, use the commands:
awplus#
awplus(config)#
Related atmf backup synchronize
Commands
show atmf backup
show atmf backup area
C613-50170-01 Rev B
™ (AMF) C
RAMEWORK OMMANDS
configure terminal
atmf backup redundancy enable
configure terminal
no atmf backup redundancy enable
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
2247