Trap (G.8032) - Allied Telesis x510-28GTX Command Reference Manual

G.8032 E R P
THERNET ING ROTECTION
(G.8032)
TRAP

trap (G.8032)

Overview Use this command to enable or disable SNMP traps for a G.8032 Ethernet Ring
Protection (ERP) instance.
trap {enabled|disabled}
Syntax
Default The SNMP traps for the ERP instance are enabled.
Mode G8032 Configure Switch
Usage Globally, ERP traps are disabled by default but can be enabled globally using the
snmp-server enable trap
Example To disable the SNMP traps for an ERP instance named "blue", use the following
commands:
awplus(config)#
awplus(g8032-config-switch)#
Related erp-instance
Commands
show g8032 erp-instance
snmp-server enable trap
Command Version 5.4.7-0.1: command added
changes
C613-50170-01 Rev B
S C
WITCHING OMMANDS
Parameter Description
enabled
Enable this ERP instance to generate traps.
disabled
Disable this ERP instance from generating traps.
g8032 erp-instance blue
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
command.
trap disabled
2215