Show Crypto Pki Trustpoint - Allied Telesis x510-28GTX Command Reference Manual

P K I C
UBLIC EY NFRASTRUCTURE OMMANDS

SHOW CRYPTO PKI TRUSTPOINT

show crypto pki trustpoint
Overview Use this command to display information about the specified trustpoint.
show crypto pki trustpoint [<trustpoint>]
Syntax
Default By default, all trustpoints are shown.
Mode Privileged Exec
Usage If no trustpoint is specified, information about all trustpoints is shown. The
command displays the authentication status of the trustpoint, the fingerprint of
the root CA certificate (if it exists), the enrollment status of the local server with the
trustpoint, a list of any applications that are configured to use the trustpoint, and
the trustpoint parameters that were configured from trustpoint-configuration
mode.
The specified trustpoints must already exist.
Example To show the details of the trustpoint "example", use the following commands:
awplus>
awplus#
Output Figure 46-4: Example output from show crypto pki trustpoint
Related crypto pki trustpoint
Commands
show crypto pki certificates
C613-50170-01 Rev B
Parameter Description
<trustpoint>
The name of the trustpoint to be shown
enable
show crypto pki trustpoint example
awplus> enable
awplus# show crypto pki trustpoint example
--------------------
Trustpoint "example"
Type
Root Certificate: 50C1856B EEC7555A 0F3A61F6 690D9463 67DF74D1
Local Server
Server Key
Applications

Authentication and Enrollment Parameters:
Enrollment
RSA Key Pair
--------------------
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
: Self-signed certificate authority
: The server is enrolled to this trustpoint.
: example-server-key
: RADIUS
: selfsigned
: example-server-key (2048 bits)
1973