Ethernet Protection Switched Ring (Epsring™) Commands; Introduction - Allied Telesis x510-28GTX Command Reference Manual

52

Introduction

Overview This chapter provides an alphabetical reference for commands used to configure
Ethernet Protection Switched Ring (EPSRing™). For more information, see the
Feature Overview and Configuration
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Command List •
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
C613-50170-01 Rev B
Ethernet Protection
"debug epsr" on page 2150
"epsr" on page 2151
"epsr configuration" on page 2153
"epsr datavlan" on page 2154
"epsr enhancedrecovery
"epsr mode master controlvlan primary
"epsr mode transit controlvlan" on page 2157
"epsr priority" on page 2158
"epsr state" on page 2159
"epsr topology-change" on page 2160
"epsr trap" on page 2161
"show debugging epsr" on page 2162
"show epsr" on page 2163
"show epsr common segments" on page 2168
"show epsr config-check" on page 2169
"show epsr <epsr-instance>" on page 2170
"show epsr <epsr-instance>
"show epsr counters" on page 2172
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Switched Ring
(EPSRing™)
Commands
Guide.
enable" on page 2155
port" on page 2156
counters" on page 2171
EPSR
"Getting Started
Guide.
2148