Ip Dhcp Snooping Agent-Option Remote-Id - Allied Telesis x510-28GTX Command Reference Manual

DHCP S C
NOOPING OMMANDS
-
IP DHCP SNOOPING AGENT OPTION REMOTE

ip dhcp snooping agent-option remote-id

Overview Use this command to specify the Remote ID sub-option of the DHCP Relay Agent
Option 82 field. The Remote ID identifies the device that inserted the Option 82
information. If a Remote ID is not specified, the Remote ID sub-option is set to the
switch's MAC address.
Use the no variant of this command to set the Remote ID to the default, the
switch's MAC address.
ip dhcp snooping agent-option remote-id <remote-id>
Syntax
no ip dhcp snooping agent-option remote-id
Default The Remote ID is set to the switch's MAC address by default.
Mode Interface Configuration for a VLAN interface.
Usage The Remote ID sub-option is included in the DHCP Relay Agent Option 82 field of
forwarded client DHCP packets:
•
•
To set the Remote ID to myid for client DHCP packets received on vlan1, use the
Examples
commands:
awplus#
awplus(config)#
awplus(config-if)#
To return the Remote ID format to the default for vlan1, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
Related ip dhcp snooping agent-option
Commands
ip dhcp snooping agent-option circuit-id vlantriplet
show ip dhcp snooping
show ip dhcp snooping agent-option
C613-50170-01 Rev B
-
ID
Parameter
<remote-id>
DHCP snooping Option 82 information insertion is enabled
snooping agent-option
DHCP snooping is enabled on the switch
VLAN to which the port belongs
configure terminal
interface vlan1
configure terminal
interface vlan1
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
An alphanumeric (ASCII) string, 1 to 63 characters in length. If
the Remote ID contains spaces, it must be enclosed in double
quotes. Wildcards are not allowed.
command; enabled by default), and
(service
(ip dhcp
ip dhcp snooping agent-option remote-id myid
no ip dhcp snooping agent-option remote-id
(ip dhcp
dhcp-snooping) and on the
snooping)
2003