Auth-Web Accounting - Allied Telesis x510-28GTX Command Reference Manual

A C
UTHENTICATION OMMANDS
-
AUTH WEB ACCOUNTING

auth-web accounting

Overview This command overrides the default RADIUS accounting method for Web-based
authentication on an interface by allowing you to apply a user-defined named list.
Use the no variant of this command to remove the named list from the interface
and apply the default method.
Syntax auth-web accounting {default|<list-name>}
no auth-web accounting
Default The default method list is applied to an interface by default.
Mode Interface Mode
Example To apply the named list 'vlan10_acct' on the vlan10 interface, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
To remove the named list from the vlan10 interface and set the accounting
method back to default, use the commands:
awplus#
awplus(config)#
awplus(config-if)#
Related aaa accounting auth-web
Commands
C613-50170-01 Rev B
Parameter Description
default Apply the default accounting method list
<list-name>
Apply a named accounting method list
configure terminal
interface vlan10
configure terminal
interface vlan10
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
auth-web accounting vlan10_acct
no auth-web accounting
1768