Atmf Container - Allied Telesis x510-28GTX Command Reference Manual

A T M F
LLIED ELESIS ANAGEMENT

ATMF CONTAINER

atmf container
Overview Use this command to create or update an AMF container on a Virtual AMF
Appliance (VAA) virtual machine.
An AMF container is an isolated instance of AlliedWare Plus with its own network
interfaces, configuration, and file system. The features available inside an AMF
container are a sub-set of the features available on the host VAA. These features
enable the AMF container to function as a uniquely identifiable AMF master and
allows for multiple tenants (up to 60) to run on a single VAA host. See the
AMF Feature Overview and Configuration Guide
multiple tenants on a single VAA host.
Use the no variant of this command to remove an AMF container.
atmf container <container-name>
Syntax
no atmf container <container-name>
Mode AMF Container Configuration
Usage You cannot delete a container while it is still running. First use the state disable
command to stop the container.
Examples To create or update the AMF container "vac-wlg-1", use the commands:
awplus#
awplus(config)#
awplus(config-atmf-container)#
To remove the AMF container "vac-wlg-1", use the commands:
awplus#
awplus(config)#
Related area-link
Commands
atmf container login
bridge-group
description (amf container)
show atmf container
state
Command Version 5.4.7-0.1: command added
changes
C613-50170-01 Rev B
™ (AMF) C
RAMEWORK OMMANDS
Parameter
<container-name> The name of the AMF container to create, update, or remove.
configure terminal
atmf container vac-wlg-1
configure terminal
no atmf container vac-wlg-1
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
for more information on running
2253