Ip Pim Accept-Register List - Allied Telesis x510-28GTX Command Reference Manual

PIM-SM C
OMMANDS
-
IP PIM ACCEPT REGISTER LIST

ip pim accept-register list

Overview Use this command to configure the ability to filter out multicast sources specified
by the given access-list at the Rendezvous Point (RP), so that the RP will
accept/refuse to perform the register mechanism for the packets sent by the
specified sources. By default, the RP accepts register packets from all multicast
sources.
Use the no variant of this command to revert to default.
ip pim accept-register
Syntax
list{<simplerange>|<exprange>|<access-list>}
no ip pim accept-register
Mode Global Configuration
awplus#
Example
awplus(config)#
awplus(config)#
C613-50170-01 Rev B
Parameter Description
<simplerange>
<100-199> IP extended access-list.
<exprange>
<2000-2699> IP extended access list (expanded range).
<access-list>
IP Named Standard Access list.
configure terminal
ip pim accept-register list 121
access-list 121 permit ip 100.1.1.1 0.0.0.0 any
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
1327