Show Crypto Pki Enrollment User - Allied Telesis x510-28GTX Command Reference Manual

P K I C
UBLIC EY NFRASTRUCTURE OMMANDS

SHOW CRYPTO PKI ENROLLMENT USER

show crypto pki enrollment user
Overview Use this command to display a list of trustpoints for which RADIUS user
enrollments have been performed, using the crypto pki enroll user command.
This indicates that PKCS#12 files for the user are available for export for the given
trustpoints, using the crypto pki export pkcs12 command.
crypto pki enrollment user <username>
Syntax
Mode Privileged Exec
Example To show the list of trustpoints to which user "exampleuser1" is enrolled, use the
following commands:
awplus>
awplus(config)#
Output Figure 46-3: Example output from show crypto pki enrollment user
Related crypto pki enroll user
Commands
crypto pki export pkcs12
C613-50170-01 Rev B
Parameter Description
<username>
The user for which enrollments are to be shown.
enable
show crypto pki enrollment user exampleuser1
awplus> enable
awplus# show crypto pki enrollment user exampleuser1
User "exampleuser1" is enrolled to the following trustpoints:
local,example
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
1972