Level (G.8032) - Allied Telesis x510-28GTX Command Reference Manual

G.8032 E R P
THERNET ING ROTECTION
(G.8032)
LEVEL

level (G.8032)

Overview Use this command to configure the level for Ring-Automatic Protection Switching
(R-APS) messages.
level <0-7>
Syntax
Default The default level is 0.
Mode G8032 Configure Switch
Usage Inside the R-APS messages is the Level field. The G.8032 Ethernet Ring Protection
(ERP) instance will use the configured level for sending R-APS messages, and is the
level that the instance expects to receive. If the node receives an R-APS message
with the improper level then the message will not be processed.
The ERP instance must be disabled to change the level, otherwise the setting is
denied.
Example To set the R-APS message level field for an ERP instance named "blue" to 3, use the
following commands:
awplus(config)#
awplus(g8032-config-switch)#
Related g8032 erp-instance
Commands
show g8032 erp-instance
Command Version 5.4.7-0.1: command added
changes
C613-50170-01 Rev B
S C
WITCHING OMMANDS
Parameter Description
<0-7>
The level used by the G.8032 ERP instance.
g8032 erp-instance blue
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
level 3
2193