Show Class-Map - Allied Telesis x510-28GTX Command Reference Manual

Q S C
O OMMANDS
-
SHOW CLASS MAP

show class-map

Overview Use this command to display the QoS class-maps' criteria for classifying traffic.
show class-map [<class-map-name>]
Syntax
Mode User Exec and Privileged Exec
Example To display a QoS class-map's match criteria for classifying traffic, use the command:
awplus#
Output Figure 40-2: Example output from the show class-map command
Related class-map
Commands
C613-50170-01 Rev B
Parameter
<class-map-name>
show class-map cmap1
CLASS-MAP-NAME: cmap1
Set IP DSCP: 56
Match IP DSCP: 7
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
Name of the class-map.
1652