Show Ipv6 Mld Groups - Allied Telesis x510-28GTX Command Reference Manual

MLD MLD S C
AND NOOPING OMMANDS
6
SHOW IPV MLD GROUPS

show ipv6 mld groups

Overview Use this command to display the multicast groups that have receivers directly
connected to the router and learned through MLD.
For information on filtering and saving command output, see the
with AlliedWare Plus" Feature Overview and Configuration
Syntax show ipv6 mld groups [<ipv6-address>|<interface>] [detail]
Mode User Exec and Privileged Exec
Examples The following command displays local-membership information for all interfaces:
awplus#
Output Figure 31-2: Example output for show ipv6 mld groups
awplus#show ipv6 mld groups 
MLD Connected Group Membership
Group Address
ff08::1
The following command displays local-membership information for all interfaces:
awplus#
Output Figure 31-3: Example output for show ipv6 mld groups detail
C613-50170-01 Rev B
Parameter Description
<ipv6-address> Optional. Specify Address of the multicast group in format
X:X::X:X.
<interface>
Optional. Specify the Interface name for which to display local
information.
show ipv6 mld groups
Last Reporter
fe80::200:1ff:fe20:b5ac
show ipv6 mld groups detail
MLD Connected Group Membership Details for port1.0.1 
port1.0.1 
Interface:
ff08::1 
Group:
00:00:13 
Uptime:
Include () 
Group mode:
fe80::eecd:6dff:fe6b:4783 
Last reporter:
Group source list: (R - Remote, M - SSM Mapping, S - Static ) 
Source Address
2001:db8::1
2002:db8::3
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Interface
vlan10 (port1.0.1)
Uptime
00:00:13
00:00:13
"Getting Started
Guide.
Uptime Expires
00:07:27 00:03:10
Flags 
v2 Exp Fwd
R 
00:04:07 Yes
00:04:07 Yes R




1280