Ip Pim Neighbor-Filter (Pim-Sm) - Allied Telesis x510-28GTX Command Reference Manual

PIM-SM C
OMMANDS
- (PIM-SM)
IP PIM NEIGHBOR FILTER

ip pim neighbor-filter (PIM-SM)

Overview This command enables filtering of neighbors on the VLAN interface. When
configuring a neighbor filter, PIM-SM will either not establish adjacency with the
neighbor, or terminate adjacency with the existing neighbors if denied by the
filtering access list.
Use the no variant of this command to disable this function.
ip pim neighbor-filter {<number>|<accesslist>}
Syntax
no ip pim neighbor-filter {<number>|<accesslist>}
Default By default, there is no filtering.
Mode Interface Configuration for a VLAN interface.
awplus#
Example
awplus(config)#
awplus(config-if)#
C613-50170-01 Rev B
Parameter Description
<number>
<1-99> Standard IP access-list number.
<accesslist> IP access list name.
configure terminal
interface vlan2
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
ip pim neighbor-filter 14
1341