Show Ip Mroute - Allied Telesis x510-28GTX Command Reference Manual

M C
ULTICAST OMMANDS

SHOW IP MROUTE

show ip mroute
Overview Use this command to display the contents of the IPv4 multicast routing (mroute)
table.
show ip mroute [<ipv4-group-addr>] [<ipv4-source-addr>]
Syntax
[{dense|sparse}] [{count|summary}]
Mode User Exec and Privileged Exec
awplus#
Examples
awplus#
awplus#
Output The following is a sample output of this command displaying the IPv4 multicast
routing table, with and without specifying the group and source IPv4 address:
Figure 32-2: Example output from the show ip mroute command
C613-50170-01 Rev B
Parameter
<ipv4-group-addr>
<ipv4-source-addr>
dense
sparse
count
summary
show ip mroute 10.10.3.34 224.1.4.3
show ip mroute 10.10.5.24 225.2.2.2 count
show ip mroute 10.10.1.34 summary
awplus# show ip mroute
IP Multicast Routing Table
Flags: I - Immediate Stat, T - Timed Stat, F - Forwarder 
installed
Timers: Uptime/Stat Expiry
Interface State: Interface (TTL)

(10.10.1.52, 224.0.1.3), uptime 00:00:31, stat expires 00:02:59
Owner PIM-SM, Flags: TF
Incoming interface: vlan2
Outgoing interface list:
vlan3 (1)
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
Group IPv4 address, in dotted decimal notation in the
format A.B.C.D.
Source IPv4 address, in dotted decimal notation in the
format A.B.C.D.
Display dense IPv4 multicast routes.
Display sparse IPv4 multicast routes.
Display the route and packet count from the IPv4 multicast
routing (mroute) table.
Display the contents of the IPv4 multicast routing (mroute)
table in an abbreviated form.
1310