Show Ip Dhcp Snooping Interface - Allied Telesis x510-28GTX Command Reference Manual

DHCP S C
NOOPING OMMANDS

SHOW IP DHCP SNOOPING INTERFACE

show ip dhcp snooping interface
Overview Use this command to display information about DHCP snooping configuration and
leases for the specified ports, or all ports.
show ip dhcp snooping interface [<port-list>]
Syntax
Mode User Exec and Privileged Exec
Example To display DHCP snooping information for all ports, use the command:
awplus#
Table 54: Example output from the show ip dhcp snooping interface command
awplus#show ip dhcp snooping interface

DHCP Snooping Port Status and Configuration:

Port: Provisioned ports marked with brackets, e.g. (portx.y.z)
Action: LG = Log
TR = Trap
LD = Link down

Port Status
--------------------------------------------------------------------------------
port1.0.1 Untrusted
port1.0.2 Untrusted
port1.0.3 Untrusted
port1.0.4 Untrusted
port1.0.5 Untrusted
port1.0.6 Untrusted
port1.0.7 Untrusted
port1.0.8 Untrusted
port1.0.9 Untrusted
port1.0.10 Untrusted
port1.0.11 Trusted
port1.0.12 Trusted
C613-50170-01 Rev B
Parameter Description
<port-list>
The ports to display DHCP snooping configuration information
for. If no ports are specified, information for all ports is displayed.
show ip dhcp snooping interface
Full Max
Leases Leases
1 1
0 50
0 50
0 50
0 50
0 1
0 1
0 1
0 1
0 1
0 1
0 1
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Action Subscriber-ID
LG -- --
LG TR LD Building 1 Level 1
LG -- --
LG -- -- Building 1 Level 2
LG -- LD Building 2 Level 1
LG -- --
LG -- --
LG -- --
-- TR --
-- -- LD
-- -- --
-- -- --
2032