Profile Name - Allied Telesis x510-28GTX Command Reference Manual

G.8032 E R P
THERNET ING ROTECTION

PROFILE NAME

profile name
Overview Use this command to associate a G.8032 profile instance with this G.8032 Ethernet
Ring Protection (ERP) instance.
profile name <erp-profile-name>
Syntax
Default If this command is not used, a profile with the name "default-profile" will be used
for this G.8032 ERP instance.
Mode G8032 Configure Switch Mode
Usage A G.8032 ERP instance uses a profile which contains timer configurations and
configurations for revertive modes of operation. This configuration can be
accepted regardless of the ERP instance being disabled or enabled. Any
parameters from a changed profile will take effect the next time the G.8032 state
machine uses the parameters in the updated profile.
Example To associate a G.8032 profile named "prof_1" with a G.8032 ERP instance named
"blue", use the following commands:
awplus(config)#
awplus(g8032-config-switch)#
Related g8032 erp-instance
Commands
g8032 profile
show g8032 erp-instance
Command Version 5.4.7-0.1: command added
changes
C613-50170-01 Rev B
S C
WITCHING OMMANDS
Parameter
<erp-profile-name>
g8032 erp-instance blue
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
Description
The name of the G.8032 profile
profile name prof_1
2195