Proxy-Port - Allied Telesis x510-28GTX Command Reference Manual

AAA C
OMMANDS
-
PROXY PORT

proxy-port

Overview Use this command to change the local UDP port used for communication between
local RADIUS client applications and the RadSecProxy AAA application. Any
unused UDP port may be selected. The default port is 1645.
Use the no variant of this command to change the UDP port back to the default of
1645.
proxy-port <port>
Syntax
no proxy-port
Default The default port is 1645.
Mode RadSecProxy AAA Configuration Mode
Usage It is not necessary to change the value from the default unless UDP port 1645 is
required for another purpose.RADIUS requests received on this port from external
devices will be ignored. The port is only used for local (intra-device)
communication.
Example To configure change the UDP port to 7001, use the following commands:
awplus#
awplus(config)#
awplus(config-radsecproxy-aaa)#
Related radius-secure-proxy aaa
Commands
server (radsecproxy-aaa)
server name-check
server trustpoint
C613-50170-01 Rev B
Parameter Description
<port>
UDP Port Number, 1-65536.
configure terminal
radius-secure-proxy aaa
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
proxy-port 7001
1867