Show Tacacs - Allied Telesis x510-28GTX Command Reference Manual

TACACS+ C
OMMANDS
+

SHOW TACACS

show tacacs+
Overview This command displays the current TACACS+ server configuration and status.
show tacacs+
Syntax
Mode User Exec and Privileged Exec
Example To display the current status of TACACS+ servers, use the command:
awplus#
Output Figure 47-1: Example output from the show tacacs+ command
Table 1: Parameters in the output of the show tacacs+ command
C613-50170-01 Rev B
show tacacs+
TACACS+ Global Configuration
Source Interface
Timeout

Server Host/ Server
IP Address Status
------------------------------------------------------------
192.168.1.10 Alive
192.168.1.11 Unknown
Output Parameter
Source Interface
Timeout
Server Host/IP Address
Server Status
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
: not configured
: 5 sec
Meaning
IP address of source interface if set with
source-interface.
A time interval in seconds.
TACACS+ server hostname or IP address.
The status of the authentication port.
Alive
The server is alive.
Dead
The server has timed out.
Error
The server is not responding or
there is an error in the key string
entered.
Unknown
The server is never used or the
status is unkown.
Unreachable The server is unreachable.
Unresolved
The server name can not be
resolved.
ip tacacs
1983