Tacacs-Server Key - Allied Telesis x510-28GTX Command Reference Manual

TACACS+ C
OMMANDS
-
TACACS SERVER KEY

tacacs-server key

Overview This command sets a global secret key for TACACS+ authentication, authorization
and accounting. The shared secret text string is used for TACACS+
communications between the switch and all TACACS+ servers.
Note that if no secret key is explicitly specified for a TACACS+ server with the
tacacs-server host
secret for the server.
Use the no variant of this command to remove the global secret key.
tacacs-server key [8] <key-string>
Syntax
no tacacs-server key
Mode Global Configuration
Usage Use this command to set the global secret key shared between this client and its
TACACS+ servers. If no secret key is specified for a particular TACACS+ server using
the
To set the global secret key to secret for TACACS+ server, use the following
Examples
commands:
awplus#
awplus(config)#
To delete the global secret key for TACACS+ server, use the following commands:
awplus#
awplus(config)#
Related tacacs-server host
Commands
show tacacs+
C613-50170-01 Rev B
command, the global secret key will be used for the shared
Parameter Description
8
Specifies a string in an encrypted format instead of plain text.
The running config will display the new password as an
encrypted string even if password encryption is turned off.
<key-string>
Shared key string applied, a value in the range 1 to 64 characters.
Specifies the shared secret authentication or encryption key for
all TACACS+ communications between this device and all
TACACS+ servers. This key must match the encryption used on
the TACACS+ server.
tacacs-server host command, this global key is used.
configure terminal
tacacs-server key secret
configure terminal
no tacacs-server key
Command Reference for x510 Series
AlliedWare Plus™ Operating System - Version 5.4.7-1.x
1987